F-Series Cylinder Heads
Frankenstein Engine Dynamics offer 4 x types of F-Series cylinder heads.
Each of these range have their own unique advantage & are designed to provide you with the winning edge over ANY competitors cylinder head offering.
Check out the below highlights for each of the 4 x types of F-Series head:
F110 - 265cc LS1/2/6 Cathedral Cylinder Heads
Set of two (2) LS1 cathedral port cylinder heads. Heads are complete and assembled. Valve covers, oil fill cap, and doweled rocker stands included with purchase.
- 10° inline valve angle configuration ideal for everything from naturally aspirated to supercharger, turbo, and nitrous applications.
- Port & Chamber volumes / flow numbers TBD.
- Standard versions designed to work with GM LS7 rockers and equivalent. Doweled rocker stands included with head purchase.
- Solid, stainless 2.135” Intake / 1.615” Exhaust valves standard – interlocking valve seats (like those found in racing heads) standard.
- Accommodates up to 3/8” straight pushrods. See Rocker section for information on solid roller applications.
- 4.030” minimum bore size (can be run on slightly smaller bores with proper head gasket).
- Includes FED Titanium 0.660” lift Spring Kit.
- 265cc equivalent
F310 - 285cc LS3 Rectangle Cylinder Heads
Set of two (2) FED F-Series F310 (LS3 rectangle) 285cc cylinder heads. Heads are complete and assembled. Valve covers, oil fill cap, and doweled rocker stands included with purchase.
- 10° inline valve angle configuration ideal for everything from naturally aspirated to supercharger, turbo, and nitrous applications.
- Port & Chamber volumes / flow numbers TBD.
- Standard versions designed to work with GM LS7 rockers and equivalent. Doweled rocker stands included with head purchase.
- Solid, stainless 2.180” Intake / 1.615” Exhaust valves standard – interlocking valve seats (like those found in racing heads) standard.
- Accommodates up to 3/8” straight pushrods. See Rocker section for information on solid roller applications.
- 4.065” minimum bore size (can be run on slightly smaller bores with proper head gasket).
- Includes FED Titanium 0.660” lift Spring Kit.
- 285cc equivalent.
F710 - 287cc LS7 Square Cylinder Heads
Set of two (2) FED F-Series F710 (LS7 square) 287cc cylinder heads. Heads are complete and assembled. Valve covers, oil fill cap, and doweled rocker stands included with purchase.
- 10° inline valve angle – small, efficient, yet easily tunable combustion chambers. Suitable for N/A and
turbo/supercharged applications. - Port & Chamber volumes / flow numbers TBD.
- Standard version designed to work with GM LS7 rockers and equivalent. Doweled rocker stands included with head purchase.
- Solid, stainless 2.250” Intake / 1.615” Exhaust valves standard – interlocking valve seats (like those found in racing heads) standard.
- Accommodates up to 3/8” straight pushrods. See Rocker section for information on solid roller applications.
- 4.125” minimum bore size (can be run on slightly smaller bores with proper head gasket).
- Includes FED titanium 0.660” lift Spring Kit.
- 287cc equivalent.
F715 - 285cc LS7 Square Cylinder Heads
Set of two (2) FED F-Series F715 (LS7 square) 285cc cylinder heads. Heads are complete and assembled. Valve covers, oil fill cap, and doweled rocker stands included with purchase.
- 15° inline valve angle – designed for True Street/Ultra Street and multi-kit nitrous applications.
- Port & Chamber volumes / flow numbers TBD.
- Standard version designed to work with GM LS7 rockers and equivalent. Doweled rocker stands included with head purchase.
- Solid, stainless 2.200” Intake / 1.650” Exhaust valves standard – interlocking valve seats (like those found in racing heads) standard.
- Accommodates up to 3/8” straight pushrods. See Rocker section for information on solid roller applications.
- 4.125” minimum bore size (can be run on slightly smaller bores with proper head gasket).
- Includes FED Titanium 0.660” Lift Spring Kit.
- 285cc equivalent.
ALL F-Series Heads Include:
- 100% Designed, Tooled, Cast and Machined in the USA.
- A357 T6 Aluminum Castings – T6 heat treated, low silica alloy. Similar in strength, machine-ability and weld-ability to 6061-T6 billet. Superior strength compared to all commercially available castings. 20% stronger than similar high-end castings made from A356. A357 is the same material used in most aftermarket engine blocks along with many cast aerospace components.
- 0.750” deck structure, thicker than all stock and most aftermarket castings
- High efficiency water jacket – by increasing efficiency the overall water jacket has been reduced for overall strength without sacrificing cooling ability for all applications including endurance racing.
- Raised runner design on both intake and exhaust – Raised runner design allows for more efficient cylinder filling, better high-rpm operation without sacrificing low and mid-range performance. Greater flow characteristics, especially when combined with our shallow valve angles. Intake flange is extended to allow all standard manifolds to fit without modification.
- Exhaust port exit is on center with valve – Substantially better flow characteristics. LS7 bolt pattern moved to accommodate all standard header designs using 2” or larger headers.
- Proprietary valve cover design – Enlarged valve cover based loosely on a SB2 pattern allows for more rocker clearance when using solid rollers, more spring clearance for larger diameter/higher lift packages. Valve covers included with purchase of heads. See valve cover section below for additional information. Valve covers are doweled and o-ringed for superior sealing and serviceability.
- -6 ORB water crossover ports – better cooling capacity and more flexible installation/plumbing options.
Valve Covers:
- 319 aluminum alloy cast valve covers – same alloy used in most aftermarket and stock cylinder head castings.
- Baffled vent section – Compatible with stock PCV/emissions components.
- -16AN ORB Oil Fill cap included.
- Available with built in coil mounts or without coil mounts.
- Available in two powder coated finishes. Fully machined versions available upon request.
Solid Roller Options:
- All F-Series Solid Roller cylinder heads available with shaft-mount, roller tip rockers.
- Available for on-center and 0.180” offset lifters.
- Solid roller heads will accommodate up to a ½” pushrod.
- F-Series shaft-mount rockers will be available as standard catalog item.